Comments on: Budget RTC Build

By: simple mods to do with my son - RCCrawler.com Bulletin Board

simple mods to do with my son - RCCrawler.com Bulletin Board — Thu, 12 Jan 2012 01:57:50 +0000

[...] to make a little better performing, AxialRacing has a little blog on easy performance upgrades. Budget RTC Build [...]

By: My ax10 rtc build - Page 2 - RCCrawler.com Bulletin Board

My ax10 rtc build - Page 2 - RCCrawler.com Bulletin Board — Tue, 10 Jan 2012 22:04:35 +0000

[...] K.O.M.’s Newbie Comp Build 2) RCCrawler.com- Your #1 source for Radio Controlled Rockcrawling! 3) Budget RTC Build Have [...]

By: Douglas

Douglas — Fri, 29 Jul 2011 18:09:57 +0000

hey man if i may say this helped me out allot but im a bit disappointed with my steering servo so is there a way i can take the steering servo saver off i put a futuba s3305 on it which is allot better but i want to know if i can put a different steering horn on i got one that came with the car but i dont know how to hook it up to the linkage

By: HeerPhesy

HeerPhesy — Wed, 15 Jun 2011 22:24:39 +0000

get cheap chanel knockoffs for more detail

By: Jason metzer

Jason metzer — Thu, 12 May 2011 11:45:15 +0000

I just bought a ax10 RTC after having a losi crawler. Axial is so much better and has so many extra parts that can be modified. My questions are - Will a proline body made for a scx10 fit on a ax10? Is it possible to swap a ax10 frame for a scx10 frame and still keep all the same axles , shocks and drivetrain, motor, esc for the purpose of being able to run different body styles???

By: emma watson

emma watson — Wed, 26 Jan 2011 15:10:23 +0000

Fascinating blog on Budget RTC Build, not like the others!

By: corum

corum — Thu, 04 Nov 2010 01:30:53 +0000

have you tried cutting some of the foam from the inside of the tire

By: Scorpion_Ax

Scorpion_Ax — Sat, 25 Sep 2010 05:02:48 +0000

I used Canadian tires pencil lead …you get it from the fishing tackle area and it is 1/4 in in diameter and you can just straighten it out and rap it around the inside of the rim and then wrap it with electrical tape to keep it still….very affective.

By: Scorpion_Ax

Scorpion_Ax — Sat, 25 Sep 2010 04:51:38 +0000

When i cut my hammers with the electric knife….If you look at your tire foam standing up and from the side i took 1/2 in wide and 1/2 inch deep V shaped notches.across the top flat all the way around so it would look like a star ….this allows the tire to grab as it rolls over objects and like Bender i also took a little off the out side edge not much though or you will greatly affect the side hill flop of the tire…..

By: Scorpion_Ax

Scorpion_Ax — Sat, 25 Sep 2010 04:45:38 +0000

The best way I have found to cut the foams is a Wallmart 9$ electric knife …..works awesome and very quick ….just be careful as it will hurt the hands if you slip with it…….